Skip to content

Technical Meshes (CAD)

Mode: Object Mode

Panel: Sidebar ‣ QuadGuide ‣ Surfaces (CAD)

Every face of a CAD part gets its own grid of quads, with an edge loop along each border.

Usage

  1. Check that Style reads Auto: Hard Surface, or set it to Hard Surface, and set Quads.
  2. If faces also meet smoothly (fillets), press Prepare CAD Part in Surfaces (CAD).
  3. Press Remesh.
The housing with the surfaces Prepare CAD Part found, one color each The housing remeshed, the quads colored by surface
The flange with the surfaces found, one color each The flange remeshed, the quads colored by surface

Settings

Prepare CAD Part
Finds the surfaces, gives each its own material, and turns on Use Materials. Afterwards it reads Prepare Again: press it after a change below to find the surfaces anew. The line below the angle counts the surfaces and materials, and says when a wall is thinner than a quad.
Angle
Faces meeting sharper than this are separate surfaces. If a face is missing its own color, change it and press Prepare Again.
Exact Shape
On by default, once the part is prepared. After Remesh, the result is put on the part's true shape: flats, cylinders, cones, spheres and tori are recognised, and each vertex moves onto its surface, onto the true line or circle where two surfaces meet at an edge, and onto the corner where three meet. You see it most on coarse exports, where the quads would otherwise follow the flat facets of a cylinder or a dome. Freeform surfaces stay as they are.
Details

Borders chooses what separates surfaces besides the angle: Sharp edges, Seams, Materials, Tangent (a flat meeting a curved face smoothly, a fillet) and Curved (two curved faces meeting smoothly, for parts whose fillets meet other curved faces).

Merge Thin joins strips narrower than half a quad to a neighbor. It is off for sheet metal, where the thin walls are the part. Keep Material Borders appears when the mesh has materials of its own and keeps their borders.

To Guides turns the borders into guides instead of materials, with Cut Lines across surfaces that have several borders. Clear Surfaces removes the colors and puts the original materials back.

Good to Know

  • If a prepared part would come out needing correction, Remesh runs once more without the surface borders as edge loops, the same remesh as without Prepare CAD Part, and keeps that result when it is clean. The message then says the surfaces' borders were not followed: the part came out cleaner without them. Exact Shape still puts that result on the true surfaces.
  • A part with many small holes can land a little above Quads: each rim needs whole rows.
  • A small hole comes out round (12 sides or more) when it is about eleven quads around. Only Quads decides that: after Prepare CAD Part the panel says how many small holes may come out angular and the Quads that makes them round; a button sets it in one click.
  • A fillet gets at least two rows of quads across, so its curve shows. Prepare CAD Part recognises fillets by their shape, including where one runs onto a curved face, and gives each its own color.
  • Walls thinner than a quad are a limit of any quad remesher; the panel warns about them.

Examples

Plate Shaft Bracket
The plate, remeshed The shaft, remeshed The bracket, remeshed
Flange Housing Thin box
The flange, remeshed The housing, remeshed The thin box, remeshed
Dome Knob Sheet with slots
The dome, remeshed The knob, remeshed The sheet with slots, remeshed

Try It Yourself

These are the parts the pictures and the numbers on this page come from.

Part What it exercises
plate.stl holes in a flat
shaft.stl coaxial cylinders
bracket.stl bores and a bend
flange.stl a bolt circle and fillets
housing.stl bosses and bores
thin_box.stl 2 mm walls
dome.stl lens flats on a sphere
knob.stl a disc on a cylinder
sheet_slots.stl slots in sheet metal
  1. File > Import > STL, pick a part.
  2. Click Prepare CAD Part.
  3. Check that Style reads Auto: Hard Surface (or set it to Hard Surface), set Quads to 1500, then Remesh.

The bench also uses three public NIST test parts (the "NIST PMI STEP Files" of nist.gov, about 140 CAD faces each). They are not included here.